-
MIK-LDG Sanitary electromagnetic flowmeter for food processing
SUP-LDG Sanitary electromagnetic flowmeter is made of stainless steel, which is widely used in water supply, waterworks, food processing, etc. It supports pulse, 4-20mA or RS485 communication signal output.
Features
- Accuracy:±0.5%(Flow speed > 1m/s)
- Reliably:0.15%
- Electric conductivity: Water: Min. 20μS/cm
Other liquid:Min.5μS/cm
- Flange:ANSI/JIS/DIN DN15…1000
- Ingress protection:IP65
Tel.: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com
-
MIK-PH6.3 pH ORP meter
SUP-PH6.3 industrial pH meter is an online pH analyzer which applied in chemical industry metallurgy, environment protection, food, agriculture and so on. With 4-20mA analog signal, RS-485 digital signal and relay output. Can be used for industrial processes and water treatment processes pH control, and support remote data transmission, etc. Features
- Measure range:pH: 0-14 pH, ±0.02pH;ORP: -1000 ~1000mV, ±1mV
- Input Resistance:≥10~12Ω
- Power supply: 220V±10%，50Hz/60Hz
- Output:4-20mA,RS485, Modbus-RTU,Relay
-
MIK-LDG Stainless steel body electromagnetic flowmeter
Magnetic flowmeters operate under the principle of Faraday’s Law of Electromagnetic Induction to measure liquid velocity. Following Faraday’s Law, magnetic flowmeters measure the velocity of conductive liquids in pipes, such as water, acids, caustic, and slurries. In order of usage, magnetic flowmeter use in water/wastewater industry, chemical, food and beverage, power, pulp and paper, metals and mining, and pharmaceutical application. Features
- Accuracy:±0.5%，±2mm/s(flowrate<1m/s)
- Electric conductivity: Water: Min. 20μS/cm
Other liquid:Min.5μS/cm
- Flange:ANSI/JIS/DIN DN10…600
- Ingress protection:IP65
-
MIK-LDG Carbon steel body electromagnetic flow meter
SUP-LDG electromagnetic flow meter is applicable for all conductive liquids. Typical applications are monitoring accurate measurements in liquid, metering and custody transfer. Can display both instantaneous and cumulative flow, and supports analog output, communication output and relay control functions. Features
- Pipe diameter: DN15~DN1000
- Accuracy: ±0.5%(Flow speed > 1m/s)
- Reliability:0.15%
- Electric conductivity: Water: Min. 20μS/cm; Other liquid:Min.5μS/cm
- Turndown ratio: 1:100
- Power supply:100-240VAC，50/60Hz; 22-26VDC
-
MIK-PH6.0 pH ORP meter
SUP-PH6.0 industrial pH meter is an online pH analyzer which applied in chemical industry metallurgy, environment protection, food, agriculture and so on. With 4-20mA analog signal, RS-485 digital signal and relay output. Can be used for industrial processes and water treatment processes pH control, and support remote data transmission, etc. Features
- Measure range:pH: 0-14 pH, ±0.02pH;ORP: -1000 ~1000mV, ±1mV
- Input Resistance: ≥10~12Ω
- Power supply: 220V±10%，50Hz/60Hz
- Output: 4-20mA,RS485, Modbus-RTU,Relay
-
MIK-LDGR Electromagnetic BTU meter
Sinomeasure electromagnetic BTU meters accurately measure the thermal energy consumed by chilled water in British thermal units (BTU), which is a basic indicator for measuring thermal energy in commercial and residential buildings. BTU meters are usually used in commercial and industrial as well as office buildings for chilled water systems, HVAC, heating systems, etc. Features
- Accuracy:±2.5%
- Electric conductivity:>50μS/cm
- Flange:DN15…1000
- Ingress protection:IP65/ IP68
-
MIK-LUGB Vortex flowmeter wafer installation
SUP-LUGB Vortex flowmeter work on the principle of generated vortex and relation between vortex and flow by theory of Karman and Strouhal, which specialize in measurement of steam, gas and liquid of lower viscosity. Features
- Pipe diameter: DN10-DN500
- Accuracy: 1.0%, 1.5%
- Range Ratio: 1:8
- Ingress protection: IP65
Tel.: +86 13018908613 (WeChat) Email: vip@sinomeasure.com
-
MIK-PTU8011 Low turbidity sensor
SUP-PTU-8011 widely used in such fields as sewage plants, Drinking water plants, water stations, surface water, and industries for inspecting the turbidity. Features Range: 0.01-100NTUResolution:The deviation of reading in 0.001~40NTU is ±2% or ±0.015NTU, choose the bigger one; and it is ±5% in the range of 40-100NTUFlow Rate: 300ml/min≤X≤700ml/minPipe Fitting: Injection Port: 1/4NPT; Discharge Outlet: 1/2NPT
-
MIK-PSS200 Suspended solids/ TSS/ MLSS meter
SUP-PTU200 Suspended Solids Meter based on the infrared absorption scattered light method and combined with the application of ISO7027 method, can guarantee the continuous and accurate detection of suspended solids and sludge concentration. Based on ISO7027, infrared double scattering light technology will not be affected by chroma for the measurement of cuspended colids and cludge concentration value. According to the usage environment, self-cleaning function can be equipped with.
Features
Range: 0.1 ~ 20000 mg/L; 0.1 ~ 45000 mg/L; 0.1 ~ 120000 mg/LResolution:Less than ± 5% of the measured valuePressure range: ≤0.4 MPaPower supply: AC220V±10%; 50Hz/60Hz
-
MIK-PTU200 Turbidity meter
SUP-PTU200 turbidity meter based on the infrared absorption scattered light method and combined with the application of ISO7027 method, can guarantee the continuous and accurate detection of turbidity. Based on ISO7027, infrared double scattering light technology will not be affected by chroma for the measurement of turbidity value. According to the usage environment, self-cleaning function can be equipped with. It assures the stability of data and reliability of performance; with the built-in self-diagnosis function, it can make sure the accurate data be delivered; besides, the installation and calibration is quite simple. Features Range: 0.01-100 NTU, 0.01－4000 NTUResolution: Less than ± 2% of the measured valuePressure range: ≤0.4 MPaPower supply: AC220V±10%; 50Hz/60Hz
-
MIK-1158-J Ultrasonic Water flow meter
An ultrasonic water flow meter is a type of flow meter that measures the velocity of a liquid by using ultrasonic waves. The meter has two transducers that are placed at an angle across the flow path of the liquid. The transducers send and receive ultrasonic pulses, and the time difference between the pulses is used to calculate the velocity of the liquid. The velocity is then multiplied by the cross-sectional area of the pipe to determine the flow rate of the liquid.
-
MIK-LUGB Vortex Type Flow Meter
A vortex flow meter is a type of flow meter used to measure the flow of liquids, gases, and steam in pipelines. It is based on the principle of measuring the frequency of vortices generated when a fluid flows around a bluff body. As the fluid passes the bluff body, it creates vortices that are shed alternately from either side of the body. These vortices are detected by a sensor and the frequency of the vortices is proportional to the flow velocity. Vortex flow meters are known for their high accuracy, low maintenance, and reliable performance. They are commonly used in industries such as chemical, petrochemical, food and beverage, and water treatment.
